Fuel Dispensers

Supplies: 20 bottles (water, pop, salad dressing)

Completed fuel dispensers

Instructions:
     Cut the bottles roughly in half
     For each bottle; add a half ounce of water at at time to the inverted top half and mark the water level
     Empty out the water, complete marking the lines, and label the ounces
     Note that a Sharpie marker's lines will not wash off with water but will be removed by denatured
          alcohol. I used a paint marker from a craft store.
     Neatly cut the bottle just above the 2-ounce mark

Back to Station 5 Instructions
Back to GS Stove Project